Pride Mobility JAZZY 1103 Manuel d'utilisateur télécharger pdf (Page 29)

User guide P9-0200-B 29 of 56 Version 2.0.3/2012

Medema Production A/S

Charging

1 Plug the cable into the control box on the powered wheelchair.

2 Plug the charger into the outlet or switch it on.

3 Use the indicator lights on the charger to check that charging has started.

4 When charging has ﬁ nished, switch off or unplug the charger, and then

remove the charger cable from the control box.

The actual battery indicator on the vehicle will show “full” after

charging for a short time. However, the batteries are not fully

charged until the indicator on the CHARGER turns green.

Note!

New batteries reach full capacity after approx. 20 discharge/

charge cycles.

Please note that the capacity of the batteries will reduce over

time and at low temperatures. Battery capacity at -10°C is half

that at +20°C.

If the MC Concept is not going to be used for an extended

period, charging once a month will sufﬁ ce.

Note!

The charger must NOT be placed on the seat during charging.

Charging while the vehicle is switched on

• The battery indicator will ﬂ ash during charging.

• After charging, the battery indicator will ﬂ ash for about 1 minute

after the charging cable is unplugged.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 55 56

Pas de commentaire

Pride Mobility JAZZY 1103 Manuel d'utilisateur Page 29